Corgi Military Legends WWII Era Series

The best known American halftracks were the M series made as a standardized design by Autocar, Diamond T, International and White. The M series had a similar front end to the White M3A1 Scout Car but used more powerful engines: a 147bhp 6.3-liter White AX in the Autocar, Diamond T, and White, and a 143bhp 1HC in the International.

(1)

The Bedford QLT lorry was the most common British-made 4x4 truck produced, with over 52,000 supplied to the British Forces between 1941 and 1945. Many of these later continued in service with the British Army in Cyprus, Korea and Malaya.

Development of the Sd. Kfz. 7 can be traced back to a 1934 requirement for an 8-ton half-track. The vehicle first appeared in 1938 and was destined to be used mainly as the tractor for the 8.8cm flak gun. The Sd. Kfz. 7 was an extremely useful vehicle, employed both as a weapons carrier and prime mover by the Wehrmacht.

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

(1)

The Cromwell tank was used by the British Army during the later stages of World War II. The Cromwell was ordered in 1941 and intended to replace the lightweight Crusader "cruiser" tank by being more heavily armoured, and, it was hoped, more survivable in battle.

(1)

The "Churchill" began life as a 1939 requirement that envisaged a return to trench-warfare, and was therefore slow and heavily armored like the Russian KV-1 series. That said, the final Churchill prototype was much lighter than had first been thought acceptable, although it still resembled a World War I tank in appearance.

In many respects, the Panther tank was viewed as the finest armored fighting vehicle of the Second World War. Based in large part upon the Soviet's highly successful T-34 medium tank, the PzKpfw V Ausfuhrung G (Type G) was built by several manufacturers including MAN, Daimler-Benz, and MNH.

(1)

By all accounts, the M4 Sherman medium tank was regarded as the workhorse of the US Army during World War II. In fact, virtually all of the Allied armies employed the Sherman in their armed forces, including the British, who developed an upgunned variant called the "Firefly".

(1)

The first generation T-34 medium tank made its debut in combat during the summer of 1941, when the Wehrmacht launched its invasion of the Soviet Union. The T-34 easily outclassed the German PzKpfw III and IV models, thanks to its hard-hitting 76.2mm main gun, thick frontal armor, wide tracks, and overall superior mobility.

By all accounts, the M4 Sherman medium tank was regarded as the workhorse of the US Army during World War II. In fact, virtually all of the Allied armies employed the Sherman in their armed forces, including the British, who developed an upgunned variant called the "Firefly".

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

(1)

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

(1)

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

The "Churchill" began life as a 1939 requirement that envisaged a return to trench-warfare, and was therefore slow and heavily armored like the Russian KV-1 series. That said, the final Churchill prototype was much lighter than had first been thought acceptable, although it still resembled a World War I tank in appearance.