Tank Aces

The first generation T-34 medium tank made its debut in combat during the summer of 1941, when the Wehrmacht launched its invasion of the Soviet Union. The T-34 easily outclassed the German PzKpfw III and IV models, thanks to its hard-hitting 76.2mm main gun, thick frontal armor, wide tracks, and overall superior mobility.

In many respects, the Panther tank was viewed as the finest armored fighting vehicle of the Second World War. Based in large part upon the Soviet's highly successful T-34 medium tank, the PzKpfw V Ausfuhrung G (Type G) was built by several manufacturers including MAN, Daimler-Benz, and MNH.

The Ausf E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

The Ausf E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

The Ausf E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

The Ausf E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf. E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

(1)

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

(1)

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

(1)

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf. E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa.

Early in 1943, orders were given to design a heavy, self-propelled anti-tank gun, which would mate a 12.8cm gun with a Tiger II chassis. On October 20th, 1943 a wooden mock-up of the enormous vehicle was shown to the OKH planners who authorized that a prototype be finished by April 1944.

(1)

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf. E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa.

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf. E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf. E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

In January 1943, a new Tiger tank was ordered by the Waffenamt, this time with a turret large enough to mount the fearsome 8.8cm L/71 gun. Besides improving its tank killing capabilities, the new Tiger was also intended to be more survivable on the battlefield.

The first generation T-34 medium tank made its debut in combat during the summer of 1941, when the Wehrmacht launched its invasion of the Soviet Union. The T-34 easily outclassed the German PzKpfw III and IV models, thanks to its hard-hitting 76.2mm main gun, thick frontal armor, wide tracks, and overall superior mobility.

(2)

The Ausf. E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

(1)

The Ausf E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

The Ausf E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

The Ausf E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

The Ausf E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

The Ausf E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

In many respects, the Panther tank was viewed as the finest armored fighting vehicle of the Second World War. Based in large part upon the Soviet's highly successful T-34 medium tank, the PzKpfw V Ausfuhrung G was built by several manufacturers including MAN, Daimler-Benz and MNH. Mounting a fearsome 7.5cm KwK42 L/70 cannon and two 7.92mm MG34 machineguns, the Panther Ausf. G represented the third and certainly the most impressive installment in the Panther series.

The Ausf E mounted a huge 8.8cm KwK36 L/56 cannon and featured two MG34 machine guns for close support against enemy infantry. By war's end, 1,354 vehicles had been produced, some rolling off the Wegmann assembly line.

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf. E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf. E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.

The German Waffenamt issued an order to design the VK4501(H) (as the PzKpfw VI Ausf. E was then known) in May 1941, just one month prior to the commencement of Operation Barbarossa. Interestingly, Henschel und Sohn of Kassel was charged with building the heavily armored chassis while Krupp, by far the largest munitionwerks in Germany, was given the task of developing the turret.